현대밸브

KOREA

Sluice Gate Valve

Specification
Size50~1,500mm
Aallowable Pressure7.5 / 10 / 16 / 20kgf /cm²
PurposeIt is used for opening and closing and flow control in water supply and wastewater facilities, plants and power plants. It can be produced in either internal screw thread type or external screw thread type.
Applicable StandardsKS B 2332, KS B 2334,  JIS B 2062, BS 5163
Driving MechanismManual, electric, pneumatic and hydraulic types
Mounting Installation MethodFlange
Major Features
  • The disc moves up and down by manual handle operation (cap) or driving mechanism to open and close the gate valve.
  • A U-shaped groove is provided to be fitted to the bottom of the gate.
  • There are the internal screw thread type with the thread installed inside the valve where it comes into contact with water and the external screw thread type with the thread installed where it does not come into contact with water.
NODESCRIPTIONMETERIAL
1BodyGCD450 / SSC13 / SSC16
2Body SeatCAC406 / STS304
3DiscGCD450 / SSC13 / SSC16
4Disc Seat CAC406 / STS304
5Body nutSS275
6Knuckle CAC406 / CAC703
7ShaftSTS304 
8Shaft Washer CAC406
9Shaft Bush CAC406
10Bonnet GCD450 / SSC13 / SSC16
11Bonnet Nut SS275
NODESCRIPTIONMETERIAL
12Body Bolt SS275
13Shaft Washer CAC406
14Packing Box GCD450 / SSC13 / SSC16
15Bonnet Bolt SS275
16Gland Packing N.B.R
17Gland Flange SS275/STS304/STS316L
18Gland Flange Bolt STS304
19Gear Box Bolt SS275 / STS304 / STS316L
20Gear Box Ass'y Ass'y
21Actuator Ass'y Ass'y
Specification
Size50~1,500mm
Aallowable Pressure7.5 / 10 / 16 / 20kgf /cm²
PurposeIt is used for opening and closing and flow control in water supply and wastewater facilities, plants and power plants. It can be produced in either internal screw thread type or external screw thread type.
Applicable StandardsKS B 2332, KS B 2334,  JIS B 2062, BS 5163
Driving MechanismManual, electric, pneumatic and hydraulic types
Mounting Installation MethodFlange
Major Features
  • The disc moves up and down by manual handle operation (cap) or driving mechanism to open and close the gate valve.
  • A U-shaped groove is provided to be fitted to the bottom of the gate.
  • There are the internal screw thread type with the thread installed inside the valve where it comes into contact with water and the external screw thread type with the thread installed where it does not come into contact with water.
NODESCRIPTIONMETERIAL
1BodyGCD450 / SSC13 / SSC16
2Body SeatCAC406 / STS304
3Disc SeatCAC406 / STS304
4DiscGCD450 / SSC13 / SSC16
5RollerGCD450 / SSC13 / SSC16
6Knuckle CAC406 / CAC703
7ShaftSTS304 
8Shaft Washer CAC406
9Shaft Bush CAC406
10Bonnet GCD450
11Bonnet Nut SS275
NODESCRIPTIONMETERIAL
12Body Bolt SS275
13Eye Bolt SS275 / STS304 / STS316L
14Packing Box GCD450 
15Bonnet Bolt SS275
16Gland Packing N.B.R
17Gland Flange SS275/STS304/STS316L
18Gland Flange Bolt STS304
19Gear Box Bolt SS275 / STS304 / STS316L
20Gear Box Ass'y Ass'y
21Actuator Ass'y Ass'y